If issues with the backup battery arise, troubleshooting may help to determine if the battery is malfunctioning. Â This document provides troubleshooting steps for ARRIS TM722 Battery Backup.
Â
CAUTION: Make sure the VOIP phone is not in use when performing these troubleshooting steps.
Â
To Troubleshoot the Battery
-
Make sure the battery is installed.
-
Verify the battery LED on the front.
-
If the battery LED is On indicates the battery is good.
-
If the battery LED is Flashing the battery maybe malfunctioning.  Proceed to step 3.
-
Remove the power cord from the modem.
-
If the modem is still powered On, the battery is functioning.
-
If the modem is not powered On, proceed to step 4.
-
Remove the battery from the bottom of the modem to check for battery corrosion and also the battery connector in the TM722 Modem.
-
If there is corrosion found on the battery, the battery needs to be replaced.
-
If there is corrosion in the unit or if the battery connector is damaged, replace the damage modem.
-
If there is no corrosion or no damage to the battery connector, re-install the battery and power on the TM722 Modem.
-
If the issue is not resolved, replace the battery.
-
If the battery has been replaced and the unit is still exhibiting the same behavior, the issue could be with the modem and may need to be replaced.
