Consumers - G18/G20: IP Address Reserve Setup
FAQs

ARRIS Consumer Care

Article

G18/G20: IP Address Reserve Setup

« Go Back

Information

 
Question
How do I reserve an IP address to a client on my G18/G20 gateway?
Answer
In certain cases, a client should receive a particular IP address from the G18/G20 and always keep that address without having to manually configure it in the client.  This can be accomplished by reserving an IP Address to a client's MAC address.  When the client disconnects and reconnects to the G18/G20, it will receive the IP address that it has been assigned.

It is recommended to set up an IP Address Reserve for clients that are configured to use Port Forwarding or DMZ.  This document contains the following sections:


Reserve IP Address Setup
  1. Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.0.1 into the address box, and press the Enter key.  The https:// Redirect page will appear.   
     
  2. The SURFboard Web Manager is redirecting to a more secure connection, click the Proceed button to continue.  The Gateway > Login page will appear.

    User-added image
     
  3. A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager.  There is no risk in proceeding to the Web Manager.  For instructions to bypass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.

    NOTE: The Home Network Wizard will appear if this is the first time accessing the Web Manager.  For assistance with the wizard, refer to article # 19602 - G18/G20: Web Manager First Time Login.
     
  4. The Username field has admin populated, enter the custom password in the Password field.

    NOTE: If the Login page prompts for an email address and password, retrieve the email address and password in the app to sign in.  For detailed instructions in the app, refer to article # 19069 - SURFboard Central: Web Manager Access.
     
  5. Click the Login button.  The Gateway > Summary page will appear.

    User-added image
     
  6. On the left-hand menu, click on Connected Devices.  The Connected Devices > Devices page will appear. 
     
  7. Locate the client under the Host Name in the Online Devices section, for the Reserve IP setup.   User-added image


Reserve IP Address Setup For Connected Devices
  1. Click the + button for the Host Name of the client.  The Manually Add Static Device window will appear.

    User-added image
     
  2. Enter a new name or keep the populated client device name for the Host Name field.
     
  3. It is recommended to reserve an IP address assigned to the client device.  To reserve the assigned IP address, do not change the last octet in the IPv4 Address field.

    NOTE: To reserve a different IP address, enter an address (between 2 to 254) that is not in use by another client device.  Check the Online Devices section to view the IP addresses that are in use to determine the available IP Address for this setup.
     
  4. The Comments box is optional, enter comments up to 63 characters. 
     
  5. Click the Save button.  The changes were saved successfully! window will appear.

    User-added image
     
  6. Click the OK button.  The Connected Devices > Devices page will appear.   

    User-added image
     
  7. Disconnect the client from the G18/G20 and reconnect it. 
     
  8. Press the F5 button to refresh the browser, then click the Host Name of the device to expand and verify that the Configuration field is set for Static.

    User-added image

Reserve IP Address Setup For Devices Not Connected

The MAC Address of the disconnected client is required for this setup and can be found on the device network information.
  1. On the left-hand menu, click the Static Addresses link to add the client manually.  The Connected Devices > Static Addresses page will appear.
     
  2. Click the Manually Add Static Device button.  The Manually Add Static Device window will appear. 

    User-added image
     
  3. Enter the name of the client in the Host Name field.  
     
  4. Enter an available IP address (between 2 to 254) in the IPv4 Address field.
     

    NOTE: It is required to reserve an IP address that is not in use by another client device.  Check the Online Devices section to view the IP addresses that are in use to determine the available IP Address for this setup.
     
  5. Obtain the MAC Address on the network information of the client and enter it in the MAC Address field.  The MAC Address format is XX:XX:XX:SS:SS:SS.
     
  6. The Comments box is optional, enter comments up to 63 characters. 
     
  7. Click the Save button.  The changes were saved successfully! window will appear. 

    User-added image
     
  8. Click the OK button.  The Connected Device > Static Addresses page will appear.

    User-added image
     
  9. The Reserved IP entry will be displayed under the Static Addresses section.

    User-added image
     
  10. When the client connects to the G18/G20 it will receive the reserved IP and be displayed on the Connected Device > Devices page under the Online Device section. 

    User-added image



Remove Reserve IP Address 
  1. To remove the Reserved IP, locate the Host Name of the device and click the X button.  The changes were saved successfully! window will appear.

    User-added image
     
  2. Click the OK button.  The Connected Devices > Devices page will appear.   

    User-added image
     
  3. Disconnect the client from the G18/G20 and reconnect it.
     
  4. Press the F5 button to refresh the browser. then click the Host Name of the device to expand and verify that the Configuration field is set for DHCP.

    User-added image

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->