Answer | The default login credential is admin for username and the default password is password or last 8 digits of the serial number.  The admin password can be customized. This document describes how to change the Admin password.
Change the Admin PasswordNOTE: If the S33/S34 is connected to a router, it is recommended to disconnect the router and connect the S33/S34 directly to a computer with an Ethernet cable.
-
Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.100.1 into the address box, and press the Enter key.  The Login page will appear.
NOTE: A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager. There is no risk in proceeding to the Web Manager. For instructions to bypass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access. -
On the Login page, enter admin in the Username field.
- Enter the customized password in the Password field.
NOTE: If this is the first time log in to the Web Manager, the default password could be password or the last 8 digits of the serial number. It is required to set a unique password to proceed to the Web Manager. For assistance with Web Manager Access, refer to article # 18552 – S33/S34: Web Manager Access. -
Click the Apply button.  The Status page will appear.
- Click the Login Settings link on the top menu. The Login Settings page will appear.
 - Enter the customized password in the Old Password field.
 - Enter a new custom password in the New Password field and re-enter the new custom password in the Repeat New Password field.
Password Requirements:
- Minimum of 8 to 16Â maximum characters
- At least one uppercase alpha character
- At least one lowercase alpha character
- At least 1 number
- One of the following special characters ~ ! @ # $ % ^ * ( ) - _ = + [ ] { } | ; : , . / ?
- Click the Apply button. The pop-up box will appear.  Â
 - Click the OK button. The Login page will appear.
  - Enter admin in the Username field.
 - Enter the custom password in the Password field then click the Apply button. The Status will appear.Â
Â
|
|
---|