Answer | When the LED lights on the front panel are on, the Receive and Send LED lights can be change from solid Blue to Green so that all of the lights are the same color. Â The Blue light indicates bonded channels for high speed Internet connection and the Green light indicates single channel Internet connection. Â This document describes how to disable/enable the blue LED.
Disable Blue LEDÂ
NOTE: If the SB6183 is connected to a router, it is recommended to disconnect the router and connect the SB6183 directly to a computer with an Ethernet cable.
- Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.100.1 into the address box, and press the Enter key.  The Status page will appear.
 - Click the Configuration link on the main menu.  The Configuration page will appear.
 - Click the Receive LED (Blue Color) drop-down menu and select Disable.
 - Click the Send LED (Blue Color) drop-down menu and select Disable.
NOTE: Changes take effect immediately.  The blue LED will change to green.
Enable Blue LED
NOTE: If the SB6183 is connected to a router, it is recommended to disconnect the router and connect the SB6183 directly to a computer with an Ethernet cable.
- Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.100.1 into the address box, and press the Enter key.  The Status page will appear.
 - Click the Configuration link on the main menu.  The Configuration page will appear.
 - Click the Receive LED (Blue Color) drop-down menu and select Enable.
 - Click the Send LED (Blue Color) drop-down menu and select Enable.
NOTE: Changes take effect immediately. Â The green LED will change to blue.Â
Â
|
|
|---|
