Consumers - SB8200: LED Light Status
FAQs

ARRIS Consumer Care

Article

SB8200: LED Light Status

« Go Back

Information

 
Question
What does the LED lights indicate on my SB8200 modem?
Answer
This document describes the function of the front and back panel LED lights on the SB8200.

Front Panel


User-added image
 
LED IconFlashingOn
User-added imageNot applicable - icon does not flash.Green: Power is properly connected.

There may be up to one minute delay for the Power LED to light up after the power is connected.
User-added imageScanning for a downstream (receive) channel Internet connection.Green: Downstream channel is connected in DOCSIS 3.0 mode.
Blue*: High-speed Internet connection with downstream channels in DOCSIS 3.1 mode.
User-added imageScanning for an upstream (send) channel Internet connection. Green: Upstream channel is connected in DOCSIS 3.0 mode.
Blue*: High-speed Internet connection with upstream channels in DOCSIS 3.1 mode.
User-added imageScanning for an Internet connection.Green: Cable modem is connected to the Internet.
*Blue - Indicates DOCSIS 3.1 operation (high-speed Internet access) which may not be available in all location.  Check with your service provider for availability in your area. 

Back Panel

User-added image
 
Port NameDescription
User-added image
10/100/1000
Two one-gigabit Ethernet port for RJ-45 network cable connection:
  • Green: LED is ON - Indicates a data transfer rate of one gigabit per second
  • Green: LED is blinking - Indicates data traffic is in progress
  • Amber: LED is ON - Indicates a data transfer rate of less than one gigabit per second
  • Amber: LED is blinking - Indicates data traffic is in progress

 

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->