Answer | The Device Status on the SBG10 Login page provides a quick overview on gateway information and connection status to the home network.  The Device Status page provides the Wi-Fi network names, number of connected Wi-Fi clients, firmware version, and Internet connection status.  This document describes how to view the SBG10 Device Status page.
How to View Device Status
- Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.0.1 into the address box, and press the Enter key.  The Login page will appear.
 - Click the Device Status button.  The SBG10 Device Status page will appear.
 - The SBG10 Device Status provides the following information:
- SSID 2.4 GHz - The wireless network name on the 2.4 GHz network.
- SSID 5.0 GHz - The wireless network name on the 5 GHz network.
- Number of Connected Clients - The total number of connected clients on the Wi-Fi network.
- Firmware Version - The current software version in the Gateway.
- Internet Connection - The current access to the Internet.  The field displays Connected when there is Internet and Not Connected when there is no Internet.
- Downstream Frequency - The center frequency for the downstream channel to be used by the modem.Â
- Downstream Signal Power - The signal received from the service provider to the cable modem.
- Downstream Signal SNR - The strength of the signal to the cable modem as compared to the noise on the line (signal/noise).Â
- Gateway Mode - The field displays Bridged when the device is functioning as a modem or Gateway when the device is functioning as a Gateway.
- Click the Close button to exit.
|
|
|---|
