Consumers - SBG10: System Logs
FAQs

ARRIS Consumer Care

Article

SBG10: System Logs

« Go Back

Information

 
Question
How do I view the System Logs in my SBG10 gateway?
Answer
The System Logs displays the current status of the gateway.  These logs are used by Internet service provider technicians.  This document describes how to view the System Logs.


View the System Logs
  1. Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.0.1 into the address box, and press the Enter key.  The Login page will appear.

    NOTE: A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager. There is no risk in proceeding to the Web Manager.  For instructions to by-pass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.
     
  2. On the Login page, enter admin in the User Name field.
     
  3. Enter password or a customized password in the Password field.

    NOTE: When using the default password to login, it may be required to set a unique password to proceed to the Web Manager.  For assistance with Web Manager Access, refer to article # 18249 – SBG10: Web Manager Access.
     
  4. Click the Apply button.  The System Basic Setup page will appear.

    User-added image
     
  5. On the System Basic Setup page, click the Utilities link on the top menu.  The System Information page will appear.
     
  6. On the System Information page, click the System Logs link on the left-hand menu.  The System Logs page will appear.
     
  7. On the System Logs page, the system logs will appear in the Log box.

    NOTE: Click the Refresh button to refresh the logs or click the Clear Log button to clear recent and previous logs in the gateway.

    User-added image

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->