Consumers - SBG6580-2: Parental Controls Time of Day Setup
FAQs

ARRIS Consumer Care

Article

SBG6580-2: Parental Controls Time of Day Setup

« Go Back

Information

 
Question
How do I block Internet access in my SBG6580-2?
Answer
The SBG6580-2 Parental Controls feature provides the ability to block or allow Internet access during a specified Time of Day.  Access permissions can be assigned to all devices on the network, or a specific device (e.g. computer, gaming console, tablet).  The Parental Control rules are applied to the MAC address of the client device.  By default, the Parental Controls feature is disabled, which allows Internet access to all devices.  This document describes how to block one device from accessing the Internet for a specified Time of Day.

Requirement

To block only one device from accessing a website, the MAC address of that device will need to be entered into the MAC Address settings. 

This document contains the following sections:


Creating a Time of Day Entry
  1. Launch a Firefox or Safari browser.  Enter http://192.168.0.1 into the address box, and press the Enter key.  

    NOTEA browser message on Chrome, Edge, Firefox, and Opera, may appear when accessing the Web Manager.  The message includes 192.168.01 uses an unsupported protocol and ERR_SSL_VERSION_OR_CIPHER_MISMATCH.  The Web Manager uses an earlier version of the TLS protocol and does not match the version allowed by the web browser.  Safari browsers on Apple PC and mobile devices are not impacted.  The workaround to access the Web Manager with a PC is to use the Firefox browser and set the TLS version to 1.  For workaround instructions refer to article # 19435 - 192.168.0.1 uses an unsupported protocol
     
  2. A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager.  There is no risk in proceeding to the Web Manager.  For instructions to bypass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.
     
  3. On the Login page, enter admin or a customized username in the Username field.
     
  4. Enter password or a customized password in the Password field.

    NOTE: On later versions of the SBG6580-2, the Wi-Fi Security Key is used as the default admin password printed on the bottom white label.  For assistance with Web Manager Access, refer to article # 18752 – SBG6580-2: Web Manager Access.


    User-added image
     
  5. Click the Login button.  The Home page will appear.

    User-added image

     
  6. Move the mouse cursor over Basic on the main menu and click the DHCP link on the sub-menu.  The Basic - DHCP page will appear.

    User-added image

     
  7. On the Basic - DHCP page, locate and copy the client's MAC Address under the Client List section to use for the Parental Control setup.

    User-added image

     
  8. Move the mouse cursor over Firewall on the main menu and click the Parental Controls link on the sub-menu.  The Firewall - Parental Controls page will appear.

    User-added image

     
  9. Under the Time Zone section, click the Current Time Zone drop-down menu and select the current time zone.
     
  10. Select Yes for Automatically adjust for Daylight Saving Time option.
     
  11. Click the Apply button. 

    User-added image

     
  12. Click the Create button above the Display Filters heading.

    User-added image

     
  13. Enter a description of the client device in the Description field.
     
  14. Enter the MAC Address of the client device to block in the MAC Address field.
     
  15. Enter 80 in the Start Port field.
     
  16. Enter 80 in the End Port field.
     
  17. Click the Protocol drop-down menu and select TCP
     
  18. Select EveryDay to block Internet access every day of the week, or select the desired day(s) to block.
     
  19. Select All day to block Internet access all the time or enter the specific start and end time into the hours (hour) and minutes (min) fields.

    NOTE 1: Check marking All day overwrites the Start and End time.  

    NOTE 2: Entry must be two digits (e.g. 07, 12) in the hours (hour) and minutes (min) fields.

     
  20. Click the Allow/Block drop-down menu and select Block.
     
  21. Click the Enabled drop-down menu and select On.
     
  22. Click the Apply button.

    User-added image

     
  23. The Firewall - Parental Controls page will now appear, and will display a filtering entry.

    NOTE 1: Repeat steps 12 - 22 for any additional entry.

    NOTE 2: For the settings to take effect, the web browser(s) on the device(s) will need to be closed and reopened.

    User-added image


Removing a Time of Day Entry
  1. Launch a Firefox or Safari browser.  Enter http://192.168.0.1 into the address box, and press the Enter key.  

    NOTEA browser message on Chrome, Edge, Firefox, and Opera, may appear when accessing the Web Manager.  The message includes 192.168.01 uses an unsupported protocol and ERR_SSL_VERSION_OR_CIPHER_MISMATCH.  The Web Manager uses an earlier version of the TLS protocol and does not match the version allowed by the web browser.  Safari browsers on Apple PC and mobile devices are not impacted.  The workaround to access the Web Manager with a PC is to use the Firefox browser and set the TLS version to 1.  For workaround instructions refer to article # 19435 - 192.168.0.1 uses an unsupported protocol
     
  2. A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager.  There is no risk in proceeding to the Web Manager.  For instructions to bypass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.
     
  3. On the Login page, enter admin or a customized username in the Username field.
     
  4. Enter password or a customized password in the Password field.

    NOTE: On later versions of the SBG6580-2, the Wi-Fi Security Key is used as the default admin password printed on the bottom white label.  For assistance with Web Manager Access, refer to article # 18752 – SBG6580-2: Web Manager Access.


    User-added image
     
  5. Click the Login button.  The Home page will appear.

    User-added image

     
  6. On the Home page, click on Parental Controls.  The Firewall - Parental Controls page will appear.

    User-added image

     
  7. On the Firewall - Parental Controls page, find the desired entry to remove and click the Remove button.

    NOTE: For the settings to take effect, the web browser(s) on the device(s) will need to be closed and re-opened.

    User-added image

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->