ARRIS Consumer Care

SBG6580-2: Quick Start Wizard

Printable View

« Go Back

Information

Question

How do I configure my wireless network using the Quick Start Wizard?

Answer

The SBG6580-2 Quick Start Wizard is an application that allows the user to customize the default Wi-Fi and admin login credentials. This document describes how to customize the Wi-Fi name and security key, and admin login username and password using the Quick Start Wizard in the SBG6580-2.

Quick Start Wizard

Launch a Firefox or Safari browser. Enter http://192.168.0.1 into the address box, and press the Enter key.

NOTE: A browser message on Chrome, Edge, Firefox, and Opera, may appear when accessing the Web Manager. The message includes 192.168.01 uses an unsupported protocol and ERR_SSL_VERSION_OR_CIPHER_MISMATCH. The Web Manager uses an earlier version of the TLS protocol and does not match the version allowed by the web browser. Safari browsers on Apple PC and mobile devices are not impacted. The workaround to access the Web Manager with a PC is to use the Firefox browser and set the TLS version to 1. For workaround instructions refer to article # 19435 - 192.168.0.1 uses an unsupported protocol.
A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager. There is no risk in proceeding to the Web Manager. For instructions to bypass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.
On the Login page, enter admin or a customized username in the Username field.
Enter password or a customized password in the Password field.

NOTE: On later versions of the SBG6580-2, the Wi-Fi Security Key is used as the default admin password printed on the bottom white label. For assistance with Web Manager Access, refer to article # 18752 – SBG6580-2: Web Manager Access.
Click the Login button. The Home page will appear.
On the Home page, click the Launch Quick Start Wizard link. The Quick Start Wizard begins.
Click the Next button on the Welcome page.
On Wi-Fi Network Name & Passphrase page, enter a new wireless network name in the Network Name (SSID) field. The name needs to be 1 to 32 alphanumeric characters long.
Enter a new wireless password in the Passphrase field. The passphrase needs to be 8 to 64 characters long.
Click the Next button.
Click the Next button on the Wi-Fi Security Configuration page.

NOTE: It is not required to change the admin username and password in order to change the default Wi-Fi credentials. It is recommended to change the default admin login credentials; check the options to make changes.
Check the Change Username box to enter a new username.
Enter a new username in the Enter New Username field.
Re-enter the new username in the Re-Enter New Username field.
Check the Change Password box to change the password.
Enter a new password in the Enter New Password field.
Re-enter the new password in the Re-Enter New Password field.
Click the Next button.

NOTE: The new username and password will take effect when the Web Manager is logged out.
Review the Wi-Fi credentials on the Review Settings page. Then click the Apply button to save the settings.

NOTE: It may take up to one minute to save.
On the Setting Applied page, write down or press the Print button to save the new Wi-Fi credentials. Click the Exit button when finished.