Consumers - SBG6580: LED Light Status
FAQs

ARRIS Consumer Care

Article

SBG6580: LED Light Status

« Go Back

Information

 
Question
What does the LED lights indicate on my SBG6580 gateway?
Answer
This document describes the function of the front and back panel LED lights on the SBG6580.

Front Panel


Image
 
LED IconBlinkingOn (Solid)
User-added imageNot applicable - icon does not blink.Green: Power is properly connected.
User-added imageScanning for a downstream (receive) channel connection.Green: Non-bonded downstream channel is connected.
Blue* High-speed Internet connected with bonded downstream channels.
User-added imageScanning for an upstream (send) channel connection.Green: Non-bonded upstream channel is connected.
Blue* High-speed Internet connected with bonded upstream channels.
User-added imageScanning for an Internet connection.Green: Start-up process completed.
User-added imageGreen: Wi-Fi enabled with encrypted wireless data activity.
Amber: Flashes during the wireless pairing process and lights up SOLID green after five seconds or less.
Green: 5 GHz wireless connection is made between the SBG6580 and another Wi-Fi enabled device on the home network; such as a printer, tablet, or laptop.
Not applicable - no LED on button.
NOTE: The Wireless LEDs will blink Amber to indicate the WPS pairing process is in progress.
Not applicable - no LED on button.
Blue*: Indicates DOCSIS 3.0 operation (high-speed Internet access) which may not be available in all locations.  Check with the service provider for availability in the area,


Back Panel

User-added image

Port NameDescription
User-added image
10/100/1000
4 one-gigabit Ethernet port for RJ-45 network cable connection:
  • Green: LED is ON - Indicates a data transfer rate of one gigabit per second
  • Green: LED is blinking - Indicates data traffic is in progress

 

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->