SBG6700-AC (v8.6.x): IP Address Reserve Setup

• Reserving an IP Address
• Unreserving an IP Address

Reserving an IP Address

1. Launch a Firefox or Safari browser.  Enter http://192.168.0.1 into the address box, and press the Enter key.  
   
   NOTE: A browser message on Chrome, Edge, Firefox, and Opera, may appear when accessing the Web Manager.  The message includes 192.168.01 uses an unsupported protocol and ERR_SSL_VERSION_OR_CIPHER_MISMATCH.  The Web Manager uses an earlier version of the TLS protocol and does not match the version allowed by the web browser.  Safari browsers on Apple PC and mobile devices are not impacted.  The workaround to access the Web Manager with a PC is to use the Firefox browser and set the TLS version to 1.  For workaround instructions refer to article # 19435 - 192.168.0.1 uses an unsupported protocol. 
    
2. A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager.  There is no risk in proceeding to the Web Manager.  For instructions to bypass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.
    
3. On the Login page, enter admin or a customized username in the Username field.
    
4. Enter password or a customized password in the Password field.
   
   NOTE: On later versions of the SBG6700-AC, the Wi-Fi Security Key is used as the default admin password printed on the bottom white label.  For assistance with Web Manager Access, refer to article # 18754 – SBG6700-AC: Web Manager Access.
   
   
    
5. Click the Login button.  The Home page will appear.
   
   
    
6. Move the mouse cursor over the Basic tab, and select the DHCP sub-link.  The Basic - DHCP page will appear.
   
   
    
7. On the Basic - DHCP page:
   a.  MAC address - Enter the MAC address of the desired client to reserve an IP address for.
    
   NOTE: For assistance in obtaining the MAC Address, please refer to the following:

   • Answer # 20446 - Find the MAC address for Windows and Macintosh Systems.
   • Answer # 20613 - Windows 7: Finding the MAC address.
   • Answer # 22248 - Windows 8: Finding the MAC address.
   • For all other devices, please refer to its vendor.
   b.  IP Address -  Enter the desired IP address for the client.
   c.  Host Name - Enter the desired name for the client.
   d.  Click the Apply button.
8. Verify that the entry is displayed in the Client List, as shown below.
   
   

Unreserving an IP Address

1. Launch a Firefox or Safari browser.  Enter http://192.168.0.1 into the address box, and press the Enter key.  
   
   NOTE: A browser message on Chrome, Edge, Firefox, and Opera, may appear when accessing the Web Manager.  The message includes 192.168.01 uses an unsupported protocol and ERR_SSL_VERSION_OR_CIPHER_MISMATCH.  The Web Manager uses an earlier version of the TLS protocol and does not match the version allowed by the web browser.  Safari browsers on Apple PC and mobile devices are not impacted.  The workaround to access the Web Manager with a PC is to use the Firefox browser and set the TLS version to 1.  For workaround instructions refer to article # 19435 - 192.168.0.1 uses an unsupported protocol. 
    
2. A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager.  There is no risk in proceeding to the Web Manager.  For instructions to bypass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.
    
3. On the Login page, enter admin or a customized username in the Username field.
    
4. Enter password or a customized password in the Password field.
   
   NOTE: On later versions of the SBG6700-AC, the Wi-Fi Security Key is used as the default admin password printed on the bottom white label.  For assistance with Web Manager Access, refer to article # 18754 – SBG6700-AC: Web Manager Access.
   
   
    
5. Click the Login button.  The Home page will appear.
   
   
    
6. Move the mouse cursor over the Basic tab, and select the DHCP sub-link.  The Basic - DHCP page will appear.
   
   
    
7. On the Basic - DHCP page in the Client List section:
   a.  Identify the reserved entry to be removed, and click the Select bullet.
   b.  Click the Delete button.