Consumers - SBG6700-AC (v8.6.x): SIP Passthrough Setup
FAQs

ARRIS Consumer Care

Article

SBG6700-AC (v8.6.x): SIP Passthrough Setup

« Go Back

Information

 
Question
How do I setup SIP Passthrough in my SBG6700-ac? 
Answer
When using a VoIP phone with the SBG6700-AC, the SIP Passthrough option in the SBG6700-AC may need to be enabled in order for that phone to have full functionality.  In other situations, it may be recommended by the VoIP phone manufacturer to disable SIP Passthrough.  By default, SIP Passthrough is enabled.  This document describes how to enable and SIP Passthrough in the SBG6700-AC.
 
NOTE: If it is not known if SIP Passthrough should be enabled or disabled, please contact the VoIP phone manufacturer.
 

To Enable SIP Passthrough

  1. Launch a Firefox or Safari browser.  Enter http://192.168.0.1 into the address box, and press the Enter key.  

    NOTE: A browser message on Chrome, Edge, Firefox, and Opera, may appear when accessing the Web Manager.  The message includes 192.168.01 uses an unsupported protocol and ERR_SSL_VERSION_OR_CIPHER_MISMATCH.  The Web Manager uses an earlier version of the TLS protocol and does not match the version allowed by the web browser.  Safari browsers on Apple PC and mobile devices are not impacted.  The workaround to access the Web Manager with a PC is to use the Firefox browser and set the TLS version to 1.  For workaround instructions refer to article # 19435 - 192.168.0.1 uses an unsupported protocol
     
  2. A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager.  There is no risk in proceeding to the Web Manager.  For instructions to bypass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.
     
  3. On the Login page, enter admin or a customized username in the Username field.
     
  4. Enter password or a customized password in the Password field.

    NOTE: On later versions of the SBG6700-AC, the Wi-Fi Security Key is used as the default admin password printed on the bottom white label.  For assistance with Web Manager Access, refer to article # 18754 – SBG6700-AC: Web Manager Access.

    User-added image
     
  5. Click the Login button.  The Home page will appear.
     
    User-added image
     
  6. Move the mouse cursor over the Advanced tab and select the Options sub-link.  The Advanced - Options page will appear.

    User-added image
     
  7. On the Advanced Options page, NAT ALG Status section:
    a.   SIP - Check Enable.
    b.   Click the Apply button.
     
    User-added image

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->