Consumers - SBG6782-AC (v1.5.x): LED Controls
FAQs

ARRIS Consumer Care

Article

SBG6782-AC (v1.5.x): LED Controls

« Go Back

Information

 
Question
How can I change the LED control lighting on my SBG6782-AC?
Answer
When the LED lights on the front panel are on, the Receive and Send LED lights can be changed from solid Blue to Green so that all of the lights are the same color.  The Blue light indicates bonded channels for high-speed Internet connection and the Green light indicates single channel Internet connection.  This document describes how to disable/enable the blue LED.


Disable Blue LED
  1. Launch a Firefox or Safari browser.  Enter http://192.168.0.1 into the address box, and press the Enter key.  

    NOTEA browser message on Chrome, Edge, Firefox, and Opera, may appear when accessing the Web Manager.  The message includes 192.168.01 uses an unsupported protocol and ERR_SSL_VERSION_OR_CIPHER_MISMATCH.  The Web Manager uses an earlier version of the TLS protocol and does not match the version allowed by the web browser.  Safari browsers on Apple PC and mobile devices are not impacted.  The workaround to access the Web Manager with a PC is to use the Firefox browser and set the TLS version to 1.  For workaround instructions refer to article # 19435 - 192.168.0.1 uses an unsupported protocol
     
  2. A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager.  There is no risk in proceeding to the Web Manager.  For instructions to bypass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.
     
  3. On the Login page, enter admin or a customized username in the Username field.
     
  4. Enter motorola or a customized password in the Password field.

    NOTE: On later versions of the SBG6782-AC, the Wi-Fi Security Key is used as the default admin password printed on the bottom white label.  For assistance with Web Manager Access, refer to article # 18755 – SBG6782-AC: Web Manager Access.


    User-added image
     
  5. Click the Login button.  The Home page will appear.

    Right click on the image to save it to your computer.

     
  6. Move the mouse cursor over Basic on the top menu, and click the LED Control link from the sub-menu. The Basic - LED Control page will appear.

    User-added image
     
  7. On the Basic - LED Control page, click the Receive LED (Blue Color) drop-down menu, and select Disable.
     
  8. Click the Send LED (Blue Color) drop-down menu, and select Disable.
     
  9. Click the Apply button. 

    User-added image
 

Enable Blue LED
  1. Launch a Firefox or Safari browser.  Enter http://192.168.0.1 into the address box, and press the Enter key.  

    NOTEA browser message on Chrome, Edge, Firefox, and Opera, may appear when accessing the Web Manager.  The message includes 192.168.01 uses an unsupported protocol and ERR_SSL_VERSION_OR_CIPHER_MISMATCH.  The Web Manager uses an earlier version of the TLS protocol and does not match the version allowed by the web browser.  Safari browsers on Apple PC and mobile devices are not impacted.  The workaround to access the Web Manager with a PC is to use the Firefox browser and set the TLS version to 1.  For workaround instructions refer to article # 19435 - 192.168.0.1 uses an unsupported protocol
     
  2. A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager.  There is no risk in proceeding to the Web Manager.  For instructions to bypass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.
     
  3. On the Login page, enter admin or a customized username in the Username field.
     
  4. Enter motorola or a customized password in the Password field.

    NOTE: On later versions of the SBG6782-AC, the Wi-Fi Security Key is used as the default admin password printed on the bottom white label.  For assistance with Web Manager Access, refer to article # 18755 – SBG6782-AC: Web Manager Access.


    User-added image
     
  5. Click the Login button.  The Home page will appear.

    Right click on the image to save it to your computer.

     
  6. Move the mouse cursor over Basic on the top menu, and click the LED Control link from the sub-menu. The Basic - LED Control page will appear.

    User-added image
     
  7. On the Basic - LED Control page, click the Receive LED (Blue Color) drop-down menu, and select Enable.
     
  8. Click the Send LED (Blue Color) drop-down menu, and select Enable.
     
  9. Click the Apply button. 

    User-added image

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->