SBG6782 Quick Start Wizard

The SBG6782 Quick Start Wizard is a six-step application that helps customize the most common Wi-Fi settings on the gateway. This allows to configure of the SSID and Wi-Fi security key for the Primary wireless network using WPA2-PSK encryption.  This document describes how to run the Quick Start Wizard.

To Run the Quick Start Wizard

1. Launch a Firefox or Safari browser.  Enter http://192.168.0.1 into the address box, and press the Enter key.  
   
   NOTE: A browser message on Chrome, Edge, Firefox, and Opera, may appear when accessing the Web Manager.  The message includes 192.168.01 uses an unsupported protocol and ERR_SSL_VERSION_OR_CIPHER_MISMATCH.  The Web Manager uses an earlier version of the TLS protocol and does not match the version allowed by the web browser.  Safari browsers on Apple PC and mobile devices are not impacted.  The workaround to access the Web Manager with a PC is to use the Firefox browser and set the TLS version to 1.  For workaround instructions refer to article # 19435 - 192.168.0.1 uses an unsupported protocol.
    
2. A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager.  There is no risk in proceeding to the Web Manager.  For instructions to bypass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.
    
3. On the Login page, enter admin or a customized username in the Username field.
    
4. Enter motorola or a customized password in the Password field.
   
   NOTE: On later versions of the SBG6782-AC, the Wi-Fi Security Key is used as the default admin password printed on the bottom white label.  For assistance with Web Manager Access, refer to article # 18755 – SBG6782-AC: Web Manager Access.
   
   
    
5. Click the Login button.  The Home page will appear.
   
   
    
6. On the Home page, click on Launch Quick Start Wizard.  The Welcome page will appear.
   
   
    
7. On the Welcome page, click the Next button.  The Wi-Fi Network Name & Passphrase page will appear.
   
   
    
8. On the Wi-Fi Network Name & Passphrase page:
   a.   Network Name (SSID) - Enter the desired network name of choice, or leave it in the current setting.
   b.   Passphrase / Wi-Fi Security Key - Enter the desired WPA key (wireless password) to use.  The WPA key must be 8 - 63 characters.
   c.   Click the Next button.  The 2.4GHz & 5.0GHZ Network page appears.
   
   
    
9. On the 2.4GHz & 5.0GHZ Network page, click the Next button.  The Security Configuration page appears.
   
   
    
10. On the Security Configuration page, click the Next button.  The Review Setting page appears.
     
    
     
11. On the Review Settings page, verify that the information is correct. The SSID of the gateway and Wi-Fi Security key is listed.
12. Click the Apply button.  The Settings Applied page appears.
    
    
     
13. On the Setting Applied page, click the Exit button.
    
     

The SBG6782 is now configured to allow wireless client connections using WPA2-PSK encryption. 

To make a connection, the wireless client must have WPA2-PSK encryption enabled and have the same WPA encryption key as the Motorola Wireless Gateway.  For assistance with the wireless client,

• Refer to Answer # 22245 - Windows 8: Wireless Connection
• Refer to Answer # 20584 - Windows 7: Wireless Connection
• Refer to Answer # 20063 - Wireless Setup on Microsoft Windows XP.
• Other 3rd party wireless utilities or devices, please refer to its vendor for assistance.