SBG6782 (v8.4.x): Changing the Wireless Channel

When using a wireless connection, interference may occur.  One variable may include other Wireless Access Points within the surrounding area.  If those Wireless Access Points are using the same wireless channel, this may cause interference.  When experiencing wireless interference when other wireless access points are present in the surrounding area, changing the wireless channel within the SBG6782 gateway can improve connectivity.  By default, the SBG6782 is set at the Auto channel.  This document describes how to change the wireless channel in the SBG6782 gateway.

To Change the Wireless Channel

1. Launch a Firefox or Safari browser.  Enter http://192.168.0.1 into the address box, and press the Enter key.  
   
   NOTE: A browser message on Chrome, Edge, Firefox, and Opera, may appear when accessing the Web Manager.  The message includes 192.168.01 uses an unsupported protocol and ERR_SSL_VERSION_OR_CIPHER_MISMATCH.  The Web Manager uses an earlier version of the TLS protocol and does not match the version allowed by the web browser.  Safari browsers on Apple PC and mobile devices are not impacted.  The workaround to access the Web Manager with a PC is to use the Firefox browser and set the TLS version to 1.  For workaround instructions refer to article # 19435 - 192.168.0.1 uses an unsupported protocol.
    
2. A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager.  There is no risk in proceeding to the Web Manager.  For instructions to bypass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.
    
3. On the Login page, enter admin or a customized username in the Username field.
    
4. Enter motorola or a customized password in the Password field.
   
   NOTE 1: On later versions of the SBG6782-AC, the Wi-Fi Security Key is used as the default admin password printed on the bottom white label.  For assistance with Web Manager Access, refer to article # 18755 – SBG6782-AC: Web Manager Access.
   
   
    
   NOTE 2:  For units that have been leased or purchased by Shaw Communications, the username is cusadmin, and the password is the Customer S/N (Serial Number), located on a white sticker on the bottom of the unit.
   
   NOTE 3:  If the unit has been leased or purchased by Time Warner Cable, and the admin username and motorola password does not allow access to the GUI, please contact Time Warner Cable for assistance.
    
5. Click the Login button.  The Home page will appear.
   
   
    
6. Move the mouse cursor over the Wireless tab and select the 802.11 Radio sub-link.  The Wireless 802.11 Radio page will appear.
   
   
    
7. On the Wireless 802.11 Radio page:
   a.  Channel - Try a different channel than what is displayed as Current.
   
   NOTE 1: It is recommended to try channel 6 or 11 if it's not listed as Current.
    
   NOTE 2: In the Wi-Fi spectrum, there are multiple channels that overlap and degrade performance.  Because channels 1, 6, and 11 do not overlap, they are used for better performance and stability.
   
   NOTE 3: When using the 2.4 GHz band with 40 MHz channel, there might be interference on legacy 802.11b/g devices. 
   
   b.  Click the Apply button.
   
   NOTE: By default, the wireless is broadcast on both 2.4 GHz and 5 GHz radios.  The previous steps are to change the channel for the 2.4 GHz radio.  To change the channel for the 5 GHz radio, please refer to step 5.
   
   
    
8. To change the channel for 5 GHz radio, click on the 5 GHz tab.  The 5 GHz Wi-Fi Network settings appear.
9. On the 5 GHz Wi-Fi Network settings:
   a.  Channel - Try a different channel than what is displayed as Current.
   b.  Click the Apply button.