Consumers - SBG6900-AC (v1.5.x): DDNS Setup
FAQs

ARRIS Consumer Care

Article

SBG6900-AC (v1.5.x): DDNS Setup

« Go Back

Information

 
Question
How do I configure DDNS in my SBG6900-AC? 
Answer
The SBG6900-AC supports the usage of a Dynamic Domain Name System (DDNS).  DDNS service provides the ability to assign a static Internet domain name to a dynamic IP address, which allows the SBG6900-AC to be easily accessed from various locations over the Internet.  Dynamic DNS is disabled by default.  This document describes how to enable and configure Dynamic DNS.

NOTE: Dynamic DNS service is required.

 
To Configure for DDNS
 
  1. Launch a Firefox or Safari browser.  Enter http://192.168.0.1 into the address box, and press the Enter key.  

    NOTE: A browser message on Chrome, Edge, Firefox, and Opera, may appear when accessing the Web Manager.  The message includes 192.168.01 uses an unsupported protocol and ERR_SSL_VERSION_OR_CIPHER_MISMATCH.  The Web Manager uses an earlier version of the TLS protocol and does not match the version allowed by the web browser.  Safari browsers on Apple PC and mobile devices are not impacted.  The workaround to access the Web Manager with a PC is to use the Firefox browser and set the TLS version to 1.  For workaround instructions refer to article # 19435 - 192.168.0.1 uses an unsupported protocol.

     
  2. A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager.  There is no risk in proceeding to the Web Manager.  For instructions to bypass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.
     
  3. On the Login page, enter admin or a customized username in the Username field.
     
  4. Enter password or a customized password in the Password field.

    NOTE: On later versions of the SBG6900-AC, the Wi-Fi Security Key is used as the default admin password printed on the bottom white label.  For assistance with Web Manager Access, refer to article # 18753 – SBG6900-AC: Web Manager Access.


    User-added image
     
  5. Click the Login button.  The Home page will appear.

    User-added image

     
  6. Move the mouse cursor over Basic on the top menu, and click the DDNS link from the drop-down submenu.  The Basic - DDNS page will appear.

    User-added image
     
  7. On the Basic - DDNS page, DDNS Service - Select Enable from the drop-down tab.

    NOTE: By default DDNS feature is Disabled.

     
  8. DDNS Provider - Enter DNS Provider. 
  9. User Name - Enter the user name.
  10. Password - Enter the Password.
  11. Host Name - Enter the Host Name.
  12. IP Address - Lists the IP address information.
  13. Status - Displays the status of the DDNS service: enabled or not enabled.
  14. Click the Apply button.

    User-added image

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->