Consumers - SBG6950AC2: LED Lights Status
FAQs

ARRIS Consumer Care

Article

SBG6950AC2: LED Lights Status

« Go Back

Information

 
Question
What do the LED lights indicate on my SBG6950AC2 Gateway?
Answer
This document describes the function of the front and back panel LED lights on the SBG6950AC2.

Front Panel

User-added image

 
LED IconBlinking BlueOn (Solid Blue)
PowerNot applicable - icon does not blink.Power is properly connected.
Send/ReceiveScanning for upstream (Send) and downstream (Receive) channel connections. Upstream (Send) and Downstream
(Receive) channels are connected.
OnlineScanning for an Internet connection.Gateway is connected to the network.
Wireless 2.4 GHzWi-Fi enabled with encrypted or unencrypted wireless data activity.

Any of the following applies:

2.4 GHz wireless connection is made between the SBG6950AC2 and another Wi-Fi enabled wireless device on your home network; for example Wi-Fi
telephone, tablet, or laptop.

The WPS Pairing process between the
SBG6950AC2 and WPS-enabled
wireless device was successful.

The WPS Pairing process either failed
or did not complete after two minutes. 

Wireless 5 GHzWi-Fi enabled with encrypted or unencrypted wireless data activity.Any of the following applies:

5 GHz wireless connection is made
between the SBG6950AC2 and another Wi-Fi enabled wireless device on your home network; for example Wi-Fi
telephone, tablet, or laptop.

The WPS Pairing process between the
SBG6950AC2 and WPS-enabled
wireless device was successful.

The WPS Pairing process either failed
or did not complete after two minutes. 
WPSWPS Pairing process is underway between the SBG6950AC2 and a WPS-enabled wireless device.WPS-enabled wireless device is connected.
USBNot applicable - no LED on port.Not applicable - no LED on port.

Back Panel

User-added image

 
NameDescription
User-added image 10/100/1000Four one-gigabit Ethernet ports for RJ-45 network cable connections:
  • Green: LED is ON - Indicates a data transfer rate of one gigabit per second
  • Green: LED is Blinking - Indicates data traffic is in progress
  • Amber: LED is ON - Indicates a data transfer rate of less than one gigabit per second
  • Amber: LED is Blinking - Indicates data traffic is in progress

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->