Consumers - SBG7580-AC: Energy Efficient Ethernet
FAQs

ARRIS Consumer Care

Article

SBG7580-AC: Energy Efficient Ethernet

« Go Back

Information

 
Question
How do I enable Energy Efficient Ethernet?
Answer
During periods of low data activity, Energy Efficient Ethernet allows for less power consumption by 50% or more while retaining full compatibility with existing equipment.  By default Energy Efficient Ethernet is disabled in the SBG7580-AC.  When Energy Ethernet Efficient is enabled the SBG7580-AC will consume less power during periods of low data activity.  This document describes how to enable Energy Efficient Energy. 


Enable Energy Efficient Ethernet
  1. Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.0.1 into the address box, and press the Enter key.  The Login page will appear.

    NOTE: A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager. There is no risk in proceeding to the Web Manager. For instructions to by-pass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.
     
  2. On the Login page, enter admin in the User Name field.
     
  3. Enter password or customized password in the Password field.

    NOTE: When using the default password to login, it may be required to set a unique password to proceed to the Web Manager.  For assistance with Web Manager Access, refer to article # 18248 – SBG7580-AC: Web Manager Access.
     
  4. Click the Apply button.  The Alert!! window will appear.

    User-added image

     
  5. The Alerts!! window includes information about the Parental Control via the Secure Home Internet Service mobile app available on the Google Play Store (Android) and App Store (iOS).
    • Check the Do not show this window again box and click the Close button to stop the alert window from appearing during the next login.
    • Click the Close button to bypass the alert window.  The alert window will appear during the next login.

      User-added image
  6. On the System Basic Setup page, click the LAN Setup link on the top menu.  The LAN Settings page will appear.

    User-added image

     
  7. On the LAN Settings page, click the Ports link on the left-hand menu.  The Ethernet Port Configuration page will appear.  

    User-added image

     
  8. On the Ethernet Port Configuration page, click the Select Ethernet Port drop-down menu to select the desired Ethernet port.
     
  9. Click the Energy Efficient Ethernet drop-down menu and select Enable. 
     
  10. Click the Apply button.  The system pop-up window will appear. 

    User-added image

     
  11. Click the OK button on the system pop-up window.  The Ethernet Port Configuration page will refresh.

    NOTE: Repeat steps 7 - 11 for additional Ethernet Ports to configure Energy Efficient Ethernet.

    User-added image

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->