Consumers - SBG7580-AC: LED Lights Status
FAQs

ARRIS Consumer Care

Article

SBG7580-AC: LED Lights Status

« Go Back

Information

 
Question
What do the LED lights indicate on my SBG7580-AC?
Answer
This document describes the function of the front and back panel LED lights on the SBG7580-AC.

Front Panel

User-added image

 
LED IconBlinking BlueOn (Solid Blue)
PowerNot applicable - icon does not blink.Power is properly connected.
Send/ReceiveScanning for upstream (Send) and
downstream (Receive) channel
connections. 
Upstream (Send) and Downstream
(Receive) channels are connected.
OnlineScanning for an Internet connection.Gateway is connected to the network.
Wireless 2.4 GHzWi-Fi enabled with encrypted or unencrypted wireless data activity.

Any of the following applies:

2.4 GHz wireless connection is made
between the SBG7580-AC and another   Wi-Fi enabled wireless device on your
home network; for example Wi-Fi
telephone, tablet, or laptop.

The WPS Pairing process between the
SBG7580-AC and WPS-enabled
wireless device was successful.

The WPS Pairing process either failed
or did not complete after two minutes. 

Wireless 5 GHzWi-Fi enabled with encrypted or unencrypted wireless data activity.Any of the following applies:

5 GHz wireless connection is made
between the SBG7580-AC and another   Wi-Fi enabled wireless device on your
home network; for example Wi-Fi
telephone, tablet, or laptop.

The WPS Pairing process between the
SBG7580-AC and WPS-enabled
wireless device was successful.

The WPS Pairing process either failed
or did not complete after two minutes. 
WPSWPS Pairing process is underway
between the SBG7580-AC and a 
WPS-enabled wireless device.
WPS-enabled wireless device is connected.
USBNot applicable - no LED on port.Not applicable - no LED on port.

Back Panel

User-added image

 
NameDescription
User-added image 10/100/1000Four one-gigabit Ethernet ports for RJ-45 network cable connections:
  • Green: LED is ON - Indicates a data transfer rate of one gigabit per second
  • Green: LED is Blinking - Indicates data traffic is in progress
  • Amber: LED is ON - Indicates a data transfer rate of less than one gigabit per second
  • Amber: LED is Blinking - Indicates data traffic is in progress

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->