Answer | The SBR-AC1200P Firewall has various settings related to blocking or exclusively allowing different types of data through the router from the Internet to the home network. Even if specific web content is allowed on the computer level, it can be blocked on the router / gateway level using the firewall options.  By default, the Firewall is set to Off; it is recommended to be enabled.  This document describes how to setup the SBR-AC1200P firewall.Â
Firewall Setup
- Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.0.1 into the address box, and press the Enter key. The Login page will appear.
 - On the Login page, enter admin in the Username field.
 - Enter password in the Password field.
 - Click the Login button.  The Home page will appear.
  - Move the mouse-cursor over Firewall on the main menu and click the Protection Level link on the sub-menu.  The Firewall - Protection Level page will appear. Â
 - On the Firewall - Protection Level page under the Firewall Protection Level section, click the Firewall Protection Setting drop-down menu and select the level of protection (Low, Medium or High).  The following are descriptions for each option: ​
- Off - Default setting.  No security, highest risk.  No services are restricted.
- Low - Minimum security, higher risk.  No services are restricted.
- Medium - Safe configuration, modest risk.  Port Forwarding and DMZ setup will be blocked and some services are restricted.  Click here to see Allowed Services list.
- High - Safest configuration, highest security.  Port Forwarding and DMZ setup will be blocked and some services are restricted.  Click here to see Allowed Services list.
- Under the Firewall Settings section, check the Block Fragmented IP Packets box to prevent all fragmented IP Packets from passing through the firewall.
 - Check the Port Scan Detection box to detect and block port scan activity from the Internet and in the home network.
 - Check the IP Flood Detection box to detect and block packet floods originating from the Internet and in the home network.  Â
 - Click the Apply button under the Firewall Protection Level section.  A restart is not required, as the Firewall settings will immediately go into effect.
Allowed Services List The following table list the type of services allowed by Firewall Protection levels.Â
Allowed Services | Firewall Protection | Service | Port | Protocol | Off | Low | Medium | High | AIM / ICQ | 5190 | TCP | Allowed | Allowed | Allowed | Blocked | DHCPv6 | 546 | UDP | Allowed | Allowed | Allowed | Blocked | DNS | 53 | TCP / UDP | Allowed | Allowed | Allowed | Allowed | FTP-S | 989-990 | UDP | Allowed | Allowed | Allowed | Blocked | HTTP | 80 | TCP | Allowed | Allowed | Allowed | Allowed | HTTP Alternate | 8080 | TCP | Allowed | Allowed | Allowed | Blocked | HTTP-S | 443 | TCP | Allowed | Allowed | Allowed | Allowed | IMAP | 143 | TCP | Allowed | Allowed | Allowed | Blocked | IPSec NAT-T | 4500 | TCP | Allowed | Allowed | Allowed | Allowed | NTP | 123 | UDP | Allowed | Allowed | Allowed | Allowed | POP3 | 110 | TCP | Allowed | Allowed | Allowed | Blocked | POP3-S | 995 | TCP | Allowed | Allowed | Allowed | Allowed | Radius | 1812 | TCP / UDP | Allowed | Allowed | Allowed | Blocked | SMTP | 25 | TCP | Allowed | Allowed | Allowed | Allowed | SMTP-S | 465 | TCP | Allowed | Allowed | Allowed | Blocked | SSH | 22 | TCP | Allowed | Allowed | Allowed | Allowed | Steam | 1725 | UDP | Allowed | Allowed | Allowed | Blocked | Steam Friends | 1200 | UDP | Allowed | Allowed | Allowed | Blocked | Telnet-S | 992 | TCP | Allowed | Allowed | Allowed | Blocked | XBOX Live | 3074 | TCP / UDP | Allowed | Allowed | Allowed | Blocked | World of Warcraft | 3724 | TCP / UDP | Allowed | Allowed | Allowed | Blocked | Yahoo Messenger | 5050 | UDP | Allowed | Allowed | Allowed | Blocked | Other Services | Allowed | Allowed | Blocked | Blocked |
|
|
---|