Consumers - SBR-AC1200P: LED Light Status
FAQs

ARRIS Consumer Care

Article

SBR-AC1200P: LED Light Status

« Go Back

Information

 
Question
What do the LEDs indicate on my SBR-AC1200P? 
Answer
This document describes the function of the front and back LED lights on the SBR-AC1200P.

Front Panel

User-added image

User-added image
 
LEDColor/BehaviorDescription
1. Primary LED
Connection, Wi-Fi paring and G.hn status

*LED Color behavior available on firmware version 1.0.5-B05 and later.
Solid green Wi-Fi router is connected to the modem
Flashing green No connection to the Internet or the modem
Flashing amberWi-Fi pairing in progress
Flashing redStart-up mode, or error
*Slow Flashing
amber and green
G.hn encrypted pairing in progress  
*Solid amberStandby mode, or Wi-Fi pairing in progress
*Fast Flashing
red and green 
G.hn encrypted pairing reset in progress
2. G.hn Signal Strength LED
G.hn network line signal status and data transmit rate
Solid greenExcellent link
Data rate >= 80 Mbps 
Flashing greenReceiving/transmitting data, excellent link
Solid amberGood link
Data rate > 40 Mbps and < 80 Mbps
Flashing amberReceiving/transmitting data, good link
Solid redFair link
Data rate <= 40 Mbps
Flashing redReceiving/transmitting data, fair link
OffNo link
3. G.hn Encrypted Link LED
G.hn network encryption status
Solid greenEncrypted pairing complete. Connected to G.hn network with encryption enabled
Flashing greenEncrypted pairing in progress. Trying to connect to G.hn network
Solid redUnencrypted pairing complete. Connected to G.hn network without encryption
Flashing redUnencrypted pairing in progress. Trying to connect to G.hn network
OffNo link
4. 2.4 GHz Wi-Fi LED
2.4 GHz wireless network status
Solid green2.4 GHz wireless network enabled and no activity
Flashing green2.4 GHz wireless network activity
5. 5 GHz Wi-Fi LED
5 GHz wireless network status
Solid greenGHz wireless network enabled and no activity
Flashing green5 GHz wireless network activity

Back Panel

User-added image

 
NameDescription
AC inConnector for power cord
WPS/G.hn pairing buttonBegins associating the Wi-Fi Router with either a wireless device or a G.hn device.
  • Press and hold the button for two to three seconds to initiate G.hn pairing.
  • Press and hold the button for five to 10 seconds to initiate WPS pairing.
  • Press and hold the button for 15 Seconds or more to unpair the Wi-Fi Router from the G.hn network.
USB 2.0 USB 2.0 host connector
WAN Connector for the modem
LAN (1-4)Connectors for use with a computer Ethernet port.
  • When the Ethernet port LED is Green the data transfer rate is one gigabit per second.  
  • When the Ethernet port LED is Amber the data transfer rate is less than one gigabit per second. 
ResetCan be used either to reset the Wi-Fi Router to its factory settings or to
restart the Wi-Fi Router.  Use a pointed non-metallic object to press and
hold this button.
  • Press and hold this button for three to five seconds to restart the Wi-Fi Router as if to power cycled the device.
  • Press and hold this button for more than 10 seconds to reset the Wi-Fi Router to its factory default settings and restart the device.  Any customized settings that have been set will be lost.

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->