SBR-AC1750: Dynamic Internet Setup

How do I setup the SBR-AC1750 for a dynamic Internet connection? 

The SBR-AC1750 wireless router, by default, is configured for a dynamic connection.  A dynamic connection is the most common one used today.  The router will get it's IP address from a DHCP server at the Internet Service Provider (ISP).  This document describes how to setup the SBR-AC1750 for a dynamic Internet connection.

Requirements

• Active Internet account
• If the (ISP) is Cable or DSL, the Modem must have a direct connection to the SBR-AC1750's WAN port via Ethernet cable for this setup to work.

To Setup Dynamic Internet Connection

1. Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.0.1 into the address box and press the Enter key.  The Login page appears.
   
   NOTE: By default the LAN IP address is 192.168.0.1.  If the default address has been changed, enter the custom address in the address box.
   
   
    
2. On the Login page:
   a.   Enter password in the Password field.
   b.   Click the Login button.  The Home page appears.
   
   
    
3. Move the mouse-cursor over the WAN tab and select the Dynamic sub-link.  The WAN - Dynamic Configuration Settings page appears.
4. On the WAN - Dynamic Configuration Settings page:
   a.   Enable DHCP - Check mark the box.
   b.   Click the Apply button.
   
   

To Verify Connection

1. Verify that the WAN LED on the front panel is solid green.