SBR-AC1750: PPPoE Internet Setup

How do I configure a PPPoE Internet connection on my SBR-AC1750?

The SBR-AC1750 wireless router can be configured for several different types of Internet connections (PPPoE, Static, and DHCP).  By default, the SBR-AC1750 is ready for a DHCP Internet connection.  Depending on the area, PPPoE may be the only Internet connection offered.  If this is the case the SBR-AC1750 can be configured for a PPPoE connection.  To determine the availability of PPPoE, check with the DSL provider to determine what type of connection is present.  This document describes how to configure for PPPoE Internet connection.

Requirements

• DSL modem
• A Ethernet cable must be connected from the DSL modem to the SBR-AC1750 WAN port
• DSL username and password

To Configure PPPoE Internet Connection

1. Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.0.1 into the address box and press the Enter key.  The Login page appears.
   
   NOTE: By default the LAN IP address is 192.168.0.1.  If the default address has been changed, enter the custom address in the address box.
   
   
    
2. On the Login page:
   a.   Enter password in the Password field.
   b.   Click the Login button.  The Home page appears.
   
   
    
3. Move the mouse-cursor over the WAN tab and select the PPPoE sub-link.  The WAN - PPPoE page appears.
4. On the WAN - PPPoE page:
   a.  Enable PPPoE - Check mark the box.
   b.  User Name - Enter the DSL PPPoE user name.
   c.  Password - Enter the DSL PPPoE password.
   d.  Click the Apply button.
   
   

To Verify Connection

1. Verify that the WAN LED on the front panel is solid green.