SBR-AC1750: Static Internet Setup

How do I setup Internet with Static IP address in my SBR-AC1750?

The SBR-AC1750 wireless router, by default is configured for a DHCP Internet connection and can also be configured for several different types of accounts (PPPoE and Static) with the service provider.  This document describes how to configure the SBR-AC1750 for an Internet connection with a Static account from the service provider.

Requirements

• IP Address
• Subnet Mask
• Default Gateway
• DNS addresses (Primary and Secondary)

To Configure Static Internet

1. Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.0.1 into the address box and press the Enter key.  The Login page appears.
   
   NOTE: By default the LAN IP address is 192.168.0.1.  If the default address has been changed, enter the custom address in the address box.
   
   
    
2. On the Login page:
   a.   Enter password in the Password field.
   b.   Click the Login button.  The Home page appears.
   
   
    
3. Move the mouse-cursor over the WAN tab and select the Static sub-link.  The WAN - Static IP Connection Type page appears.
4. On the WAN - Static IP Connection Type page:
   a.   Enable Static IP - Check mark the box.
   b.   IP address - Enter the static IP address.
   c.   Subnet Mask - Enter the subnet mask.
   d.   Gateway Address - Enter the gateway address.  
   e.   Click the Apply button.  The Message from webpage appears.
   
   
    
5. On the Message on webpage box, click the OK button.  The WAN - DNS Settings page appears.
   
   
    
6. On the WAN - DNS Settings page:
   a.   Primary DNS Server IP - Enter the Primary DNS addresses.
   b.   Secondary DNS Server IP - Enter the Secondary DNS addresses
   c.   Click the Apply button.
   
   

 

To Verify Connection

1. Verify that the WAN LED on the front panel is solid green.