SBR-AC1750: WPS Pin Entry Setup

How do I establish a WPS wireless connection using WPS PIN?

The WPS (Wireless Protected Setup) feature allows wireless clients and the SBR-AC1750 to establish a wireless connection with a push of a button or by exchanging pin code.  WPS and WPA2-PSK (Wireless Protected Access) wireless encryption are enabled by default in the SBR-AC1750.  WPS automatically generates a new strong WPA key for the router and any WPS client devices on wireless network.  

The SBR-AC1750 supports two types of WPS: PIN Entry and PBC (Push Button Connection).  There are two methods to establish connection using WPS PIN Entry:

• Adding a WPS client's pin into the SBR-AC1750
• Adding the SBR-AC1750's WPS PIN into the WPS client  

This document describes using one of two methods to establish a connection using WPS PIN Entry.

Requirements

• Wireless client must support WPS
• The client's WPS must support hardware or software Pin Entry

NOTE 1: Not all client wireless devices support WPS.  Please refer to the wireless client's documentation.

NOTE 2: Older, non-WPS clients can still be added to the network by configuring them with WPA-PSK.
 

Adding a WPS client's pin into the SBR-AC1750

1. Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.0.1 into the address box and press the Enter key.  The Login page appears.
   
   NOTE: By default the LAN IP address is 192.168.0.1.  If the default address has been changed, enter the custom address in the address box.
   
   
    
2. On the Login page:
   a.   Enter password in the Password field.
   b.   Click the Login button.  The Home page appears.
   
   
    
3. Move the mouse-cursor over the Basic tab and select the WPS Settings sub-link.  The Basic - WPS Settings page appears.
4. On the Basic - WPS Settings page:
   a.   Enrollee PIN Code - Locate the WPS client's pin and enter it.
   
   NOTE: Refer to WPS client's manufacturer manual on how to locate the client's PIN.
   
   b.   Click the Enroll button. 
   
   NOTE: The exchange may last up to two minutes.
   
   

Adding the SBR-AC1750's WPS PIN into the WPS client  

1. On the Basic - WPS Settings page:
   a.   Locate the Device PIN Code as shown below.
   b.   Enter the pin into the WPS client.
   
   NOTE 1: Refer to WPS client's manufacturer manual for instructions.
   
   NOTE 2: The exchange may last up to two minutes.