ARRIS Consumer Care

SBR-AC3200P: MAC Passthrough Setup

Printable View

« Go Back

Information

Question

How do I pass a WAN IP address through to a device connected to my SBR-AC3200P?

Answer

The MAC Pass-through feature allows a device on the LAN to have a public address assigned to it. All other client devices will connect using NAPT on the private LAN subnet. MAC Pass-through is used when a port number or packet protocol that an in-bound application might use cannot be anticipated. For example, some network games select arbitrary port numbers when a connection is opened. This feature may also need to be used when connecting multiple gaming systems to the Internet at the same time. This document provides steps to pass through a WAN IP address to a connected device.

CAUTION: When a client device is setup for MAC Pass-through, it will be fully accessible from the Internet. For security purposes, please make sure that the device is protected by a software firewall.

NOTE: When a device is setup for MAC Pass-through, it will be inaccessible from other client devices connected to the gateway.

Requirements

Subscribe to additional Internet IP address from the cable provider, up to 32 IP addresses supported.
Client device MAC address, which can be gathered from the client device or in the Web manager of the SBR-AC3200P.
Client device network configuration set to obtain an IP address automatically via DHCP (normally the default setting).

Enable MAC Pass-through

Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.0.1 into the address box, and press the Enter key. The Login page will appear.
On the Login page, enter admin in the Username field.
Enter password in the Password field.
Click the Login button. The Home page will appear.
Move the mouse-cursor over Advanced on the main menu and click the Options link on the sub-menu. The Advanced - Options page will appear.
On the Advanced Options page, scroll to the bottom of the page to the Pass-through MAC Addresses section.
In the Pass-through MAC Addresses section, enter the MAC address of the device to pass the WAN IP address to, then click on Add MAC Address.
To stop passing through the WAN IP address to a device, click on the MAC address in the list, then click on Remove MAC address.