ARRIS Consumer Care

SBX-1000P: LAN Subnet Setup

Printable View

« Go Back

Information

Question

How do I configure the LAN settings in the SBX-1000P?

Answer

The SBX-1000P includes configurable options for the Local Area Network (LAN). The LAN IP Address and Subnet can be configured and modified to suit the needs of the network. By default, the LAN IP address is 192.168.100.254. This document describes how to change the LAN IP address and Subnet of the SBX-1000P.

NOTE: If the LAN IP address is modified to be in a different subnet (e.g. 192.168.100.1), the SBX-1000P will automatically change the range to use addresses in that subnet.

Changing the Local Area Network (LAN) IP Address

Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.100.254 into the address box, and press the Enter key. The Login page appears.

NOTE 1: By default the LAN IP address is 192.168.100.254. If the default address has been changed, enter the custom address in the address box.

NOTE 2: For instructions on how to login SBX-1000P, please refer to Article # 16140 - SBX-1000P: Login Access.
On the Login page, enter password in the Password field.
Click the Apply button. The Status - Device page appears.
Move the mouse-cursor over Basic on the top menu, and click the IP link from the drop-down submenu. The Basic - IP page appears.
On the Basic - DHCP page, LAN IP Address - Enter the desired IP address for the LAN interface here. By default, 192.168.100.254 is used.

NOTE: The LAN IP address used must be within the correct Subnet.
Click the Apply button after configuring the LAN IP Address and Subnet.

NOTE: The settings will take effect after power cycle of the device.