ARRIS Horizontal Logo
Company | Solutions Services Products
Consumers - SBX-1000P: LED Controls
FAQs

ARRIS Consumer Care

Article

SBX-1000P: LED Controls

Printable View
« Go Back

Information

 
Question
How can I change the LED control lighting on my SBX-1000P? 
Answer
The SBX-1000P includes the ability to enable or disable the LEDs on unit.  This document describes how to disable and enable the LED. 
 
Disable LED
  1. Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.100.254 into the address box, and press the Enter key.  The Login page appears.

    NOTE 1: By default the LAN IP address is 192.168.100.254.  If the default address has been changed, enter the custom address in the address box.

    NOTE 2: For instructions on how to login SBX-1000P, please refer to Article # 16140 -  SBX-1000P: Login Access.


    Right click on the image to save it to your computer.
     
  2. On the Login page, enter password in the Password field.
  3. Click the Apply button.  The Status page appears.

    Right click on the image to save it to your computer.
     
  4. Move the mouse-cursor over Advance on the top menu, and click the Configuration link from the drop-down submenu. The Advanced - Configuration page appears.
  5. On the Advanced - Configuration page, LEDs - click the drop-down tab, and select Off.
  6. Click the Apply button. 

    Right click on the image to save it to your computer.
 
Enable LED
  1. Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.100.254 into the address box, and press the Enter key.  The Login page appears.

    NOTE 1: By default the LAN IP address is 192.168.100.254.  If the default address has been changed, enter the custom address in the address box.

    NOTE 2: For instructions on how to login SBX-1000P, please refer to Article # 16140 -  SBX-1000P: Login Access.

    Right click on the image to save it to your computer.
     
  2. On the Login page, enter password in the Password field.
  3. Click the Apply button.  The Status page appears.

    Right click on the image to save it to your computer.
     
  4. Move the mouse-cursor over Advance on the top menu, and click the Configuration link from the drop-down submenu. The Advance - Configuration page appears.
  5. On the Advanced - Configuration page, LEDs - click the drop-down tab, and select On. 
  6. Click the Apply button. 

    Right click on the image to save it to your computer.

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 
Print
Follow Us        
Company
Products
 
1995 - 2024 ARRIS Group, Inc. All Rights Reserved
 -->