SURFboard Central: SBG6950AC2 Setup

Requirements:

• SURFboard SBG6950AC2 must be at default setting (out-of-box or after factory reset). 
• Wi-Fi enabled on iPhone or Android device (mobile or tablet) with Internet access.

1. Setup the SURFboard Manager on an iOS device or on an Android device. 
2. Migrate From SURFboard Manager App to SURFboard Central app.

1. Download the SURFboard Central app from the app store on an Apple or Android mobile device.  
   
       
    
2. If the SBG6950AC2 is customized, perform a factory reset.  For assistance with Factory Reset, click here.
    
3. Tap the SURFboard icon then tap the Get Started button.  The Allow notification pop-up will appear. 
   
   
    
4. It is required to enable Location Services in the SURFboard Central app to perform first-time setup installation.  The steps and screens in iOS may vary from Android OS.  For more information on the location services or change the Location Service in the mobile device settings, refer to article # 18476 - SURFboard Central: Location Services. 
   
   For iOS: Tap the Allow While Using the app button and then tap the Continue button. 
   Allow Once -  Location services are enabled during this instance and will be asked again when the app is hard closed and reopened.
   Allow While Using the app - Location services are enabled only when the app is in use.
   
   
   
   For Android: Tap the Continue button.  Tap the Allow button on the access device's location services and access photos, media, and files on your device message prompts.  These permission are mandatory to perform first-time setup installation of the mAX router. 
   
     
    
5. Tap the SURFboard Gateway ISP cable connected with Integrated Wi-Fi box, then tap the Next button. 
   
   
    
6. Tap the SBG6950AC2 model, then tap the Next button. 
   
   
    
7. Click the Start Install button.
   
   
    
8. If this is a first-time setup tap the Sign Up button.
   
   NOTE: If the gateway was setup previously, enter the email address that was used to setup the gateway into the Email address field, then tap the Sign In button.  Click here to proceed to step 11.
   
   
    
9. Enter a new email address into the Email ID field for the SURFboard account.
    
10. Enter a first name in the First Name field and enter a last name in the Last Name field.
     
11. Tap the box for I agree to the Terms and Conditions, then tap the Sign Up button.
    
    
     
12. A verification code email will be sent to the email used.  Enter the verification code into the blank field.
    
    NOTE: Tap the Resend link to resend the verification code email if not received.
    
    
     
13. Once the code is verified, tap the Next button.
    
    
     
14. Tap the Let's Start button.
    
    
     
15. Remove the existing modem/gateway, connect the coaxial cable to the new SURFboard Gateway.
     
16. Connect the power supply to the SURFboard Gateway and plug it into an outlet, then tap the Next button.
    
    
     
17. Tap the box for the Internet Service Provider that is used, then tap the Next button.
    
    NOTE: If the Internet Service Provider is not listed tap on Other.
    
    
     
18. It is required to activate the SURFboard Gateway using the HFC MAC Address and the serial number located at the bottom of the device with the Internet service provider.
    
    Contact Service Provider  - Tap to call the Internet service provider and activate the SURFboard Gateway.
    Self Activate - Tap to use the self activation steps and the Internet service provider's URL to activate the SURFboard Gateway.
    Skip - Tap to proceed as the SURFboard Gateway has been activated.
    
    CAUTION: If this is the first time setup, the Gateway must be activated with the Internet service provider or the SURFboard Central app setup will not complete successfully.  The HFC MAC address is required when activating a new Gateway.   
    
    
     
19. Wait 5 - 10 minutes until the Online LED is solid blue or green, then tap the I'm Online button.
    
    
     
20. Success, tap the Next button.
    
    
     
21. Tap the Scan button to scan the QR code on the bottom of the SURFboard Gateway.
    
    NOTE: To enter the Wi-Fi credentials manually tap the Setup Manually button, then click here to proceed.
    
    
     
22. Tap the Scan button.
    
    
     
23. The application would like to access the camera, tap the OK button.
    
    
     
24. SURFboard Central needs permission to access the mobile device's camera to scan the barcode.
    
    For iOS: Tap the OK button to provide permission for SURFboard Central to access the camera. 
    For Android: Tap the Allow button to provide SURFboard Central access to take pictures and record video.
    
     
     
25. Scan the QR code located on the bottom device with the mobile device.  
    
    
     
26. The Wi-Fi Name and Password are filled in.  Tap the Submit button.
    
    NOTE: If the Setup Manually button was tapped previously, enter the Wi-Fi Name and Password located on the bottom white sticker, then tap the Submit button.
    
    
     
27. Tap the Join button to connect to the Wi-Fi network.
    
    NOTE: Android devices will automatically connect to the Wi-Fi network.
    
    
     
28. The mobile device is connecting to the Gateway.
    
    NOTE: If the Wi-Fi Communication Failure appears, ensure the SURFboard Gateway is activated with the Service Provider and Online.
    
    
     
29. Success, tap the Continue button. 
    
    
     
30. The SURFboard Gateway is being registered for warranty coverage automatically.
    
    
     
31. Congratulations, tap the Continue button.   
    
    
     
32. The Wi-Fi management features are being setup, tap the Get Started button.
    
    
     
33. Tap the Skip link.
    
    
     
34. Tap the Do It Now button to change the default Wi-Fi credential.  To change the Wi-Fi credential another time tap the Later link, then click here to proceed.
    
    
     
35. Enter a wireless network name in the Network Name (SSID) field.  The SSID Character must be between 1 to 32 characters long.
     
36. Enter a wireless password in the Password field.  The password needs to be 8 to 63 characters long.  Use upper and lower case letter, numbers, and symbols for strength.
     
37. Tap the Save Changes button.
     
    
     
38. Tap the Join button.
    
    NOTE: Android devices will automatically connect to the Wi-Fi network.
    
    
     
39. The Network screen will refresh with the new Network Name (SSID), tap the Home link to return to the Home screen.
    
    
     
40. The Home screen displays the My Network, My Devices, My Experiences, and Network Speed.
     
41. Connect all clients to the SBG6950AC2.