Answer | The feature to turn on Energy Efficient Ethernet on the T25 is available on firmware version  TS11.02.57 and newer.  During periods of low Internet activity, Energy Efficient Ethernet features reduces power consumption by 50% or more while retaining full compatibility with existing equipment. By default Energy Efficient Ethernet is disabled in the T25. This document describes how to enable Energy Efficient Ethernet.
Enable Energy Efficient Ethernet
- Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter http://192.168.100.1 into the address box and press the Enter key.  The Login page will appear.
NOTE 1: A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager.  There is no risk in proceeding to the Web Manager. For instructions to by-pass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.
NOTE 2: On firmware prior to version 11.02, the Status page will appear and the admin Login page is unavailable.
 - On the Login page, enter admin in the Username field.
 - Enter the customized password in the Password field, then click the Login button. The Status page will appear.
NOTE: If this is the first-time access to the Web Manager Access, refer to article # 18100 – T25: Web Manager Access.
 - Scroll down to the Energy Efficient Ethernet section, check mark the box for either LAN Port 1 and or LAN Port 2.Â
 - Click the Apply button. The Status page redirects to a security or private risk alert on the web browser.
NOTE: A security or private risk alert may appear on the web browser advising users to proceed with caution when accessing the Web Manager.  There is no risk in proceeding to the Web Manager. For instructions to by-pass the alert screen, refer to article # 18181 - Alert Message for Web Manager Access.
|
|
|---|
