Consumers - TG862G/CT & TG862R: Locating the Software Version

ARRIS Consumer Care


TG862G/CT & TG862R: Locating the Software Version

« Go Back


Where can I find the software version in my TG862 Gateway? 

The software (also known as firmware) version of the TG862 is located on its configuration page.  Some features may vary depending on the software version the TG862 has.  The TG862 does not support manual software upgrades.  Any firmware or software changes must be implemented via the cable network.  The cable provider can update the firmware based on what they have approved for their network distribution.  This document describes how to locate the software version.

To Locate the Software Version

  1. Launch a web browser, such as Internet Explorer, Firefox, or Safari.  Enter into the address box, and press the Enter key.  The Login page appears.

    NOTE: By default the LAN IP address is  If the default address has been changed, enter the custom address in the address box.
  2. On the Login page:
    a.   Enter admin in the Username field.
    b.   Enter password in the Password field. 
    c.   Click the Login button.  The Gateway > At a Glance page appears.

  3. On the left-hand menu, click on Software.  The Gateway > Software page appears.
  4. Check the Software Version in the System Software Version section.




Was this article helpful?


Your feedback is appreciated.

Characters Remaining: 255