TG862G/NA: UPnP Setup

UPnP™ (Universal Plug and Play) is a set of protocols that allows a device to automatically discover other UPnP devices (anything from an Internet gateway device to a light switch), for communication, entertainment, and sharing data.  UPnP-enabled devices (such as PCs or gaming consoles) can retrieve the router's WAN IP address, and automatically create NAT port maps.  This is an ideal setup for applications or services that requires UPnP.  By default, UPnP is enabled to allow communication for UPnP-enabled devices in the home network.  This document describes how to disable UPnP in the TG862 Gateway.

NOTE: With UPnP enabled, a virus, Trojan horse, worm, or other malicious program that manages to infect a computer/device on the local area network could bypass the firewall completely.  Since UPnP assumes local programs are trustworthy and allows them to forward ports.  It is recommended to manually configure port forwarding in the TG862 Gateway, and disable UPnP to avoid the security vulnerabilities associated with this protocol.  For assistance with port forwarding, refer to article # 8813 - TG862G/NA: Port Forwarding Setup.  
 

Disable UPnP

1. Launch a web browser, such as Internet Explorer, Firefox, or Safari. Enter http://192.168.0.1 into the address box, and press the Enter key.  The Login page will appear.
   
   NOTE: By default the LAN IP address is 192.168.0.1.  If the default address has been changed, enter the custom address in the address box.
    
2. On the Login page:
   a.   Enter admin in the Username field.
   b.   Enter password in the Password field.
   c.   Click the Login button.  The System Basic Setup page will appear.
   
   
    
3. On the top-menu, click on LAN Setup.  The LAN Settings page will appear.
4. On the LAN Settings page:
   a.   Enable UPnP - Uncheck the box.
   b.  Click the Apply button.
    
   NOTE: A reboot of the unit is not required for changes to take effect.