Consumers - mAX W30/W31: LED Light Status
FAQs

ARRIS Consumer Care

Article

mAX W30/W31: LED Light Status

« Go Back

Information

 
Question
What do the LED light indicate on my W30/W31 mAX Router?
Answer
The document describes the LED ring and bottom panel LED lights on the mAX W30/W31 routers.

LED Ring 

Right click on the image to save it to your computer.
 
LED BehaviorAction
Solid amber Booting
Solid white Boot Successful
Rapidly alternating blue and white (~1 sec)Attempting to pair with Mobile App via Bluetooth during on-boarding
Slowly alternating blue and white (3 secs)Paired with Mobile App via Bluetooth during on-boarding
Slowly alternating blue and red (3 secs)Paired with Mobile App via Bluetooth during on-boarding and WAN down
Solid blue"Normal" state; on-boarding complete; connected to Internet; latest firmware installed; connection greater than 1 Gbps
Rapidly alternating blue and amber (~1 sec)Downloading software in background
Solid redNo WAN or BH connection for more than 30 seconds
Solid bluemAX router good WAN connection state
Solid redmAX router disconnected WAN connection state
Solid bluemAX satellite Wi-Fi strength good; greater than 1 Gbps
Solid purplemAX satellite Wi-Fi strength weak; less than 1 Gbps
Solid redmAX satellite Wi-Fi strength bad; disconnected

Bottom Panel

User-added image
 
NameLEDDescription
LAN Ethernet PortGreen: LED indicates a GigE data connection is madeFor Ethernet device connections (i.e., TV, game console, PC, etc).
WAN Ethernet PortGreen: LED indicates a GigE data connection is madeFor connection to your cable/DSL modem/gateway or fiber ONT device.
LAC Ethernet PortGreen: LED indicates a GigE data connection is madeFor connection to modems that support greater than 1 Gbps service.

Feedback

 

Was this article helpful?


   

Your feedback is appreciated.

Characters Remaining: 255

 

Print
-->